Save. Share. Connect.
Saturday, June 25, 2016
VOLUME - NUMBER
ATX/MDM West '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
Atlantic Design/ATX/MDM '16
Nepcon South China '15
SEMICON West '15
ATX/MDM EAST '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
NEPCON China '15
ATX WEST/APEX '15
AATE and IPC MW 11
SMTAI, Autotest, ATX MW/MDM and Assembly '14
SEMICON West '13
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
IPC APEX '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
NEPCON China Product Preview '12
Atlantic Design/MDM 10
Electronics West/MDM 11
SEMICON WEST 10
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
Atlantic Design/MDM 09
SEMICON WEST 08
NEPCON South China '13
ATExpo & IPC MW 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Electronic West/MDM 09
SMTAI and productronica '13
Multi tradeshow Product Preview '12
AATE/IPC Midwest 10
Electronics West/MDM 12
ATE and IPC MW 09
SMTAI and productronica '13
Atlantic Design/MDM 08
HOME / CURRENT ISSUE
Add Message Board
OK Int'l Unveils Advanced Package Rework Solution
Scorpion rework system.
Garden Grove, CA — OK International has introduced the modular Metcal Scorpion Rework System, which provides accurate component placement and can create specifically tailored reflow profiles through the company's special convection heating technology with nozzle and dual-zone pre-heater in one user-friendly, single platform rework system.
The Scorpion incorporates numerous features that ease the learning curve for new operators while providing the power and performance expected by more experienced users. The patent pending SmartPlace Technology vision system uses dual image overlay technology to provide an image of the solder balls and PCB patterns without the need for complicated prism alignment. The system is totally self-contained and ready to use once it is plugged into a power outlet. The company is also showing the new OKi MFR-1150, a Desoldering System with Venturi Workstand providing a shop air option for all MFR series power supplies. The MFR-1150 is a complete shop air desoldering system that includes a power supply, desolder hand-piece and venturi workstand.
The MFR-UK5 Upgrade kit can also turn existing MFR-1100 or MFR-2200 series systems and older MFR-abc systems into a state-of-the-art desoldering system. The built-in venturi provides 25-in.Hg (0.85 Bar), which substantially increases desolder capability. The MFR-H5-DS can be used as a pencil or as a pistol style by simply adding a clip-on grip supplied with the handpiece.
Solder collection capabilities have been increased by 40 percent from previous MFR desolder systems and the innovative replaceable collection chamber enables reduced downtime and quicker changeover. Also on display is the OKi MRS-1100A, an integrated convection rework system for the removal and placement of BGA/CSP and SMT components. This product offers the choice of using either the embedded profiling capability that can be configured to operate at a fixed temperature, or a four-zone programming option. It also allows the temperature to be controlled either at the heat output or at the board.
The Metcal MX-5000 Series Soldering and Rework System will also be on display along with a choice of 4 handpieces proving its ability to increase productivity and process control for a wide range of applications. Delivering more power, advanced ergonomics and innovative SmartHeat Technology, the MX-5000 represents a next-generation soldering system.
Contact: OK International, 12151 Monarch St., Garden Grove, CA 92841
714-799-9910 fax: 714-799-9533 Web:
See at SMT/Hybrid Booth #9-312.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM