Save. Share. Connect.
Friday, October 21, 2016
VOLUME - NUMBER
NEPCON South China '16
SEMICON West '16
Atlantic Design/ATX/MDM '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
Nepcon South China '15
SEMICON West '15
ATX/MDM EAST '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
NEPCON China '15
ATX WEST/APEX '15
AATE and IPC MW 11
SMTAI, Autotest, ATX MW/MDM and Assembly '14
SEMICON West '13
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
IPC APEX '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
NEPCON China Product Preview '12
Atlantic Design/MDM 10
Electronics West/MDM 11
SEMICON WEST 10
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
Atlantic Design/MDM 09
SEMICON WEST 08
NEPCON South China '13
ATExpo & IPC MW 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Electronic West/MDM 09
SMTAI and productronica '13
Multi tradeshow Product Preview '12
AATE/IPC Midwest 10
Electronics West/MDM 12
ATE and IPC MW 09
SMTAI and productronica '13
Atlantic Design/MDM 08
Add Message Board
Hammond Intros Online Configurator and New Accessories
Modular freestanding enclosure.
Cheektowaga, NY — Hammond Manufacturing has introduced an online configuration tool for its HME Series of modular freestanding enclosures, the Q-Assembly service, www.q-assembly.com. The tool is simple and logical to use. It guides the specifier from the initial selection of the required cabinet design and its size, though the selection of options and accessories to the generation of a bill of materials and a quotation.
Using the configurator prevents the selection of incompatible accessories and reduces time. The cabinet is factory-assembled at no cost and is shipped as a ready-to-install unit, greatly reducing on-site assembly time.
Four additional accessories for the HME range have also been introduced. A new solid plinth can be installed ahead of the delivery of the cabinet, which allows cables to be run into the unit through two gland plates as a first fix. The cabinet is then secured to the plinth base from above in a very simple operation without having to move the base from its installed position.
Intended primarily for instrumentation and utility applications, new full height vertical ground bars have been introduced to complement the existing horizontal versions. Manufactured from one-inch wide solid copper, the bars are assembled to the cabinet at the top and bottom using spacers. They are tapped 10/32 every 3U for direct mounting of ground cables and they are fully compatible with existing 25 and 75mm grid straps and spacers.
For heavy-duty installations, new full height support bar accessory kits for inner side and rear panels provided greater rigidity and stiffness for the optional internal panels. With the kits installed, the safe loading of the panel is increased, allowing heavier components to be safely mounted on to the panel without it flexing or distorting.
Contact: Hammond Manufacturing Co., Inc., 475 Cayuga Rd., #100, Cheektowaga, NY 14225-1309
716-630-7030 fax: 716-630-7042 E-mail: firstname.lastname@example.org Web:
See at electronica Booth #A2.465.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM