Monrovia, CA — Miyachi Unitek Corporation has introduced its Sigma 5-Axis Fiber Laser Cutting System, a new technology that enables three-dimensional cut paths. The system operates at high speed, with high precision, with a position-based firing laser power control, and unique cutting features that make it suitable for use in cutting thin metals, especially those used in precision medical cutting tools.
|Laser cutting system. |
The flexible system configuration of a two-axis rotary assembly, mounted to an XY stage, maximizes laser on-part accessibility, system simplicity, and tooling path efficiency for high speed, high precision laser cutting of thin metals. It is suitable for thin metals with unique cut paths, non-symmetrical features, beveled edges, off-axes cutting, compound angles, and internal cut radii of less than 50 microns.
Linear motors and high torque direct drive rotary axes on the Sigma 5 Axis Laser Cutting System have been optimally configured to provide the best performance for speed and quality, while maintaining part dimensional accuracy. The LF series fiber lasers handles focus spot sizes down to 20 microns, and offers high pulse frequency, excellent power and pulse stability, fine control of pulse width, and laser power levels up to 500W, which enables a wide variety of metal and thickness to be cut to high dimensional accuracy.
The special position-based firing control method accommodates multi-linear and rotary axis motion to control the laser pulse frequency for consistent pulse overlap according to the position of the laser spot on the part.
Contact: Miyachi Unitek Corp., 1820 S. Myrtle Ave., Monrovia, CA 91016 626-303-5676 E-mail: email@example.com Web: http://www.miyachiunitek.com.