Tuesday, February 21, 2017
Home/Current Issue >  Electronic Mfg. Products > 

ACI's Failure Analysis E-Booklet Available at No Charge

Philadelphia, PA — ACI has now made its popular e-booklet, "Failure Analysis Techniques for Electronics," free for download from its online store (store.aciusa.org). The booklet covers and explains defects such as head-in-pillow, solder paste voiding and measurement, pad cratering, and gold embrittlement ...
Read More

EPLAN Expands Education Software Network License

Schaumburg, IL — EPLAN has launched a new version of its EPLAN Education software, based on the latest release of its EPLAN Platform 2.6 suite of engineering software products. EPLAN Education Campus now provides a network license for up to 300 users and three instructors, a 12-fold increase in user ...
Read More

Find More Electronics Manufacturing Products in “Product Preview”

Many product announcements that might normally be found in this section have been included in our “Product Preview” section this issue, as ATX/MD&M West and IPC/APEX announcements. There you will also find booth numbers, where the products may be seen and discussed ...
Read More

IPTE Offers Spring Mounter and Test Handlers

Alpharetta, GA — IPTE has recently introduced its SpringMounter machine, which is compact and able to place springs onto the target PCB every 1.2 seconds. The machine is equipped with a single-lane transport system with input, output and process positions. A dual-lane option is also available. ...
Read More

All Flex Compiles Flexible Circuit Video Library

Northfield, MN — All Flex has compiled a library of videos as an educational resource for customers, design engineers and electronic technicians interested in flexible circuitry.
Read More

Alpha Launches Master Tensioning Frame

Somerset, NJ — Alpha Assembly Solutions has launched its tensoRED Master Tensioning Frame, the latest development in the company's state-of-the-art printing stencil frames. The frame has been specially designed to provide higher and more even tension than the company's previous tensoRED frame ...
Read More

Caltronics Purchases Mirtec 3D AOI System

Oxford, CT — Mirtec has sold one of its MV-6 OMNI 3D AOI systems to Caltronics, a PCB manufacturing and electronic design company. The system was purchased at the SMTA International exhibition in Rosemont, Illinois.
Read More

CAMI Research Intros Cable Test Board

Acton, MA — CAMI Research has introduced a new board for its CableEye cable and harness test systems. Populated with solder pads to accept both aligned and staggered, 1.25 and 1.5 mm (0.05 and 0.06 in.), surface mount and through-hole connectors, the board addresses any market with a demand for board ...
Read More

CDE Intros Flat Aluminum Electrolytic Capacitors

New Bedford, MA — Cornell Dubilier Electronics has introduced the latest in its series of Flatpack ruggedized flat aluminum electrolytic capacitors, the MLSG. The series of products targets compact power supply applications in military and aerospace, as well as other critical systems. Design enhancements ...
Read More

Digicom Adds Nitrogen to Soldering and Reflow

Oakland, CA — EMS provider Digicom Electronics is now generating its own nitrogen to use in its hand, selective and reflow soldering processes to strengthen bonds and to improve solder adhesion. Adding nitrogen minimizes device failure and provides higher levels of PCB integrity, especially in mission ...
Read More

DTI Releases High-Voltage Power Supply

Bedford, MA — Diversified Technologies, Inc., (DTI) has released a compact, solid-state, high-voltage DC power supply designed to provide efficiency and reliability in a small enclosure.
Read More

Dymax Certifies Black Conformal Coating

Torrington, CT — Dymax's Multi-Cure® 9451 black conformal coating has received UL V0 flammability certification for materials used in printed circuit boards. Formulated for UV and secondary heat cure, the material is used for environmental protection of PCBs, wire harnesses, electronic components ...
Read More

Engineered Materials: Dam and Fill Chip Encapsulants

Delaware, OH — Engineered Materials Systems has introduced its 640-35 (dam) and 640-46 (fill) dam and fill, UV-cured chip encapsulants for chip-on-board smart card applications. The new materials are designed to protect wirebonds and to reduce the stresses associated with thermal cycling. The materials ...
Read More

Epoxies: Lightweight Silicone Potting Compound

Cranston, RI — Overall weight is an important consideration for design engineers, especially in the fields of automotive, aerospace and consumer electronics. Epoxies, Etc., has developed its 20-1634 lightweight silicone potting compound to keep overall design weight down. According to the company ...
Read More

Graco Intros Automated Dispensing System for TIMs

North Canton, OH — Graco Advanced Fluid Dispense (AFD) has introduced its UniXact, a fully-automated precision dispensing platform that provides a single source for motion, fluid dispense and process monitoring for thermal interface material (TIM) management. The platform has been designed to facilitate ...
Read More

Master Bond's Silicone Meets NASA Outgassing Specs

Hackensack, NJ — Designed for use in a vacuum, Master Bond's MasterSil 973S-LO is an adhesive, sealant and coating that meets NASA low-outgassing requirements. The electrically conductive, two-component silicone can be used in the aerospace, electronic, opto-electronic and specialty OEM industries ...
Read More

Metcal's Solder Wire Feeder Cuts Soldering Time

Cypress, CA — Metcal has introduced its USF-1000 solder wire feeder, designed to add a new level of control and convenience to the soldering process. With the ability to integrate easily with the company's MX-5200 or MX-500 series solder systems, the solder wire feeder increases soldering speed while ...
Read More

Mycronic Delivers High-Volume Jet Printers

Rowley, MA — Mycronic has received an order for several MY600 jet printer systems from a high-volume manufacturer based in Asia. The customer has several 24-hour production locations in the region. This order is the third of its kind from the customer and delivery is set to take place before the ...
Read More

PDR Launches Intra-Ocular Thermal Sensor

Shingle Springs, CA — PDR Americas has introduced an intra-ocular-adjustable "read zone" thermal sensor for high-end rework — the PDR Z+ Class sensor. The temperature sensor has been specifically engineered for rework environments, providing the accuracy needed for high-yield rework programs.
Read More

Qioptiq: High-Speed Zoom Lens for Automated Imaging

Waltham, MA — Qioptiq, an Excelitas Technologies® company, has introduced its Fetura+ advanced zoom lens. The enhanced Fetura+ enables high-speed and reliable optical performance in the machine vision and inspection markets.
Read More
search login

Click here to cancel

You were trying to view a protected page.
Please login to gain access or cancel to go back to the site.
User ID:  
Remember User Name
Stay signed in.

Forgot your password?