Save. Share. Connect.
Wednesday, October 26, 2016
VOLUME - NUMBER
Daily News Archive
Front Page Articles
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Daily News Archive
Add Message Board
Juki’s reputation for quality and speed continues RX-6 Flex Placer receives a 2013 Global Technology Award
Solothurn, Switzerland ? November 2013 ?
Juki Automation Systems, a world-leading provider of automated assembly products and line solutions and part of Juki Corporation, announces that it was awarded a 2013 Global Technology Award in the category of “Placement – Medium to High Volume” for its RX-6 Flex Placer. The award was presented to the company during a Tuesday, November 12, 2013 ceremony that took place at the Productronica trade fair in Munich, Germany.
The RX-6 is a brand new modular mounter that combines high quality, flexibility and productivity. Equipped with the new LaserAlign® module “LNC120”, the machine features a maximum placement speed of 42’000 cph on a footprint of only 1.25 m and is even more accurate and reliable than all previous models. The RX-6 is extendable by the RX-7 Ultra High-Speed Placer that reaches a maximum placement speed of 75’000 cph.
Replaceable heads allow configuring a production line best suited to the current requirements. The rear head can be changed between a 6 nozzle head and a 3 nozzle head resulting in greater flexibility.
The six nozzle head supports components from 01005 up to 33.5 x 33.5 mm and with height up to 33 mm. The 3 nozzle head supports an even wider variety: from 01005 chips up to 100 x 100 mm or 50 ×180 mm long connectors and with a height also up to 33 mm. These heads are designed to handle a wide variety of components from ultra miniature resistors to large ICs or connectors. 3D or “Package-on-Package” (PoP) placement is possible using the optional fluxer units. Support for both, flux or solder paste, is available.
Placement Monitor (EPV) is a standard function. An ultra miniature camera built into the head section takes pictures images of component pick and placement in real time. An analysis is run for presence/absence and traceability information can be saved. This unique function prevents defective PCBs and reduces the time for root cause failure analysis.
Using 8 mm electronic double tape feeders the RX-6 with its space saving design handles up to 160 different components and delivers therefore ultimate flexibility to the customer. Additionally, it offers the highest productivity in its class with high-speed production with just 1 station / 2 beams / 2 heads. High-speed placement is performed with on-the-fly vision centering (IC components: 14,000 CPH) and the high-speed Tray Server TR7D enables fast supply of tray components, all at low cost. Additionally, thanks to the dual lane conveyor and dual head design, only one RX-6 is required where two machines would typically be needed for equal speed.
The standard RX-6 can handle PCBs up to 610 x 590 mm and with the long board option the size can even be increased up to a 905 x 590 mm.
For more information about JUKI and its products, visit www.jas-smt.com.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM