Save. Share. Connect.
Wednesday, January 18, 2017
VOLUME - NUMBER
Electronic Mfg. Products
All Flex Compiles Flexible Circuit Video Library
Northfield, MN — All Flex has compiled a library of videos as an educational resource for customers, design engineers and electronic technicians interested in flexible circuitry.
Alpha Launches Master Tensioning Frame
Somerset, NJ — Alpha Assembly Solutions has launched its tensoRED
Master Tensioning Frame, the latest development in the company's state-of-the-art printing stencil frames. The frame has been specially designed to provide higher and more even tension than the company's previous tensoRED frame ...
Caltronics Purchases Mirtec 3D AOI System
Oxford, CT — Mirtec has sold one of its MV-6 OMNI 3D AOI systems to Caltronics, a PCB manufacturing and electronic design company. The system was purchased at the SMTA International exhibition in Rosemont, Illinois.
CAMI Research Intros Cable Test Board
Acton, MA — CAMI Research has introduced a new board for its CableEye cable and harness test systems. Populated with solder pads to accept both aligned and staggered, 1.25 and 1.5 mm (0.05 and 0.06 in.), surface mount and through-hole connectors, the board addresses any market with a demand for board ...
CDE Intros Flat Aluminum Electrolytic Capacitors
New Bedford, MA — Cornell Dubilier Electronics has introduced the latest in its series of Flatpack ruggedized flat aluminum electrolytic capacitors, the MLSG. The series of products targets compact power supply applications in military and aerospace, as well as other critical systems. Design enhancements ...
Digicom Adds Nitrogen to Soldering and Reflow
Oakland, CA — EMS provider Digicom Electronics is now generating its own nitrogen to use in its hand, selective and reflow soldering processes to strengthen bonds and to improve solder adhesion. Adding nitrogen minimizes device failure and provides higher levels of PCB integrity, especially in mission ...
DTI Releases High-Voltage Power Supply
Bedford, MA — Diversified Technologies, Inc., (DTI) has released a compact, solid-state, high-voltage DC power supply designed to provide efficiency and reliability in a small enclosure.
Dymax Certifies Black Conformal Coating
Torrington, CT — Dymax's Multi-Cure
9451 black conformal coating has received UL V0 flammability certification for materials used in printed circuit boards. Formulated for UV and secondary heat cure, the material is used for environmental protection of PCBs, wire harnesses, electronic components ...
Engineered Materials: Dam and Fill Chip Encapsulants
Delaware, OH — Engineered Materials Systems has introduced its 640-35 (dam) and 640-46 (fill) dam and fill, UV-cured chip encapsulants for chip-on-board smart card applications. The new materials are designed to protect wirebonds and to reduce the stresses associated with thermal cycling. The materials ...
Epoxies: Lightweight Silicone Potting Compound
Cranston, RI — Overall weight is an important consideration for design engineers, especially in the fields of automotive, aerospace and consumer electronics. Epoxies, Etc., has developed its 20-1634 lightweight silicone potting compound to keep overall design weight down. According to the company ...
Graco Intros Automated Dispensing System for TIMs
North Canton, OH — Graco Advanced Fluid Dispense (AFD) has introduced its UniXact, a fully-automated precision dispensing platform that provides a single source for motion, fluid dispense and process monitoring for thermal interface material (TIM) management. The platform has been designed to facilitate ...
Master Bond's Silicone Meets NASA Outgassing Specs
Hackensack, NJ — Designed for use in a vacuum, Master Bond's MasterSil 973S-LO is an adhesive, sealant and coating that meets NASA low-outgassing requirements. The electrically conductive, two-component silicone can be used in the aerospace, electronic, opto-electronic and specialty OEM industries ...
Metcal's Solder Wire Feeder Cuts Soldering Time
Cypress, CA — Metcal has introduced its USF-1000 solder wire feeder, designed to add a new level of control and convenience to the soldering process. With the ability to integrate easily with the company's MX-5200 or MX-500 series solder systems, the solder wire feeder increases soldering speed while ...
Mycronic Delivers High-Volume Jet Printers
Rowley, MA — Mycronic has received an order for several MY600 jet printer systems from a high-volume manufacturer based in Asia. The customer has several 24-hour production locations in the region. This order is the third of its kind from the customer and delivery is set to take place before the ...
PDR Launches Intra-Ocular Thermal Sensor
Shingle Springs, CA — PDR Americas has introduced an intra-ocular-adjustable "read zone" thermal sensor for high-end rework — the PDR Z+ Class sensor. The temperature sensor has been specifically engineered for rework environments, providing the accuracy needed for high-yield rework programs.
Qioptiq: High-Speed Zoom Lens for Automated Imaging
Waltham, MA — Qioptiq, an Excelitas Technologies
company, has introduced its Fetura+
advanced zoom lens. The enhanced Fetura+ enables high-speed and reliable optical performance in the machine vision and inspection markets.
Techcon Launches Positive Displacement PC Pump
Cypress, CA — Techcon Systems, a product group of OK International, has launched its TS8100 series positive displacement progressive cavity (PC) pump. The continuous volumetric dispense pump is based on PC technology and uses a special stator and rotor design to provide consistent and accurate dispensing ...
Treston Adds Workstation Products to QuickShip Program
Canton, GA — Treston (formerly Sovella) has introduced a new line of products to its QuickShip program, and has developed an easy-to-use design tool, making it simple to design and order Treston workstations. Recently, the company unified its global brand under the name Treston in order to increase ...
ULT AG Intros Laser Fume Purification System
Loebau, Germany — ULT AG has developed an extraction and filtration system designed to purify laser fumes. The LAS 1200 enables a high degree of purification by moving air through five different filtration stages. Due to its multiple stage filtration and the type of filter media, the system ensures ...
Versum Releases Gas Temperature Control System
Tempe, AZ — Versum Materials has introduced its GASGUARD
eV temperature control system, which has been designed to deliver reliable fab-wide heat sourcing and control of electronic specialty gases that require heating to maintain or increase flow. It is engineered for the delivery of gases including ...
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM