Thursday, June 30, 2016
HOME / CURRENT ISSUE >  Electronic Mfg. Products > 

Akrometrix Intros Digital Image Correlation Module

Atlanta, GA — Akrometrix, a provider of thermal warpage and strain metrology equipment, has introduced its latest generation digital image correlation (DIC) module. The system is available for the company's AXP and PS200 platforms.

A-Laser Offers Infrared Laser Cutting Services

Milpitas, CA — As products decrease in size, they require more complex and compact designs. One of the precision technologies used to meet these intricate challenges is infrared laser cutting.

Asscon Debuts Vapor-Phase Vacuum Soldering System

Konigsbrunn, Germany — Asscon Systemtechnik Elektronik has introduced its latest vapor-phase vacuum soldering system, the VP7000. The new system is an in-line model without workpiece carriers and is designed for large-scale, void-free production of complex assemblies, including 3D-MID, in continuous ...

ASSET Simplifies Debugger Connections for DCI

Richardson, TX — A new system controller for ASSET® InterTech's SourcePoint hardware-assisted software debug platform allows engineers to begin software debug immediately. The software offers an easy way to connect SourcePoint to Intel®-based target platforms that support direct connect interface ...

ATEC Now Rents EMC Partner AVI3000

San Diego, CA — Advanced Test Equipment Rentals (ATEC) has teamed up with EMC Partner to carry the AVI3000 indirect lightning generator for its rental customers. The AVI3000 allows users to test products for outside electromagnetic interference, which determines whether or not the product can stand up to new ...

Cal Test Intros High-Voltage Differential Probes

Yorba Linda, CA — Test Electronics has introduced a new line of high-voltage differential probes. The series is marketed under the Cal Test Electronics licensed brand, Elditest, and includes three models: CT4068, CT4076 and CT4079.

CAMI Intros Screw Terminal Connector Board

Acton, MA — CAMI Research has introduced a new board for its CableEye® cable and harness testing systems. Populated with four 16-pole screw terminal blocks, the CB29H addresses high-voltage (HiPot) testing to 2100 VDC/1200 VAC. Of particular interest to the harness testing market, the board is ...

Cicoil Offers Flat Cables for Wearable Electronics

Valencia, CA — Designed to provide long-term reliability and durability, Cicoil's highly flexible flat data and video cables are now being offered for use in wearable electronics. Possible applications of the technology include military biosensors, infotainment systems, mobile computing, and virtual ...

ClassOne Enhances Solstice Plating Tools

Kalispell, MT — ClassOne Technology, a manufacturer of electroplating systems, has introduced its Plating-Plus process chambers, which add more capabilities to Solstice® electroplating platforms.

Computrol Installs Nordson DAGE X-ray System

Meridian, ID — Computrol, a provider of high-mix, low-to-mid-volume electronic manufacturing services to OEMs, has purchased an XD7600NT Ruby X-ray inspection system from Nordson DAGE. The system has been installed at Computrol's facility in Meridian, Idaho.

Corelis Intros Latest JTAG and Serial Bust Test Tools

Cerritos, CA — Corelis, a supplier of high-performance boundary-scan test and measurement tools, has introduced its latest product family of JTAG and serial bus test products. The newest ScanExpress product family, version 8.3, showcases an improved project management environment, broader e.MMC programming ...

Elite Feeder Solutions Intros Slimline Label Feeder

Reading, UK — Elite Feeder Solutions, a provider of specialized feeders for the SMT and robotics industries, has introduced its 30 mm (1.2 in.) Slimline label feeder. The feeder has been designed to save space in a pick-and-place system.

Ellsworth and Dow Corning Sponsor Webinar

Germantown, WI — Ellsworth Adhesives, a distributor of adhesives, specialty chemicals and dispensing equipment, partnered with Dow Corning to sponsor a live and interactive webinar. The webinar was hosted by Design World and was entitled "Consumer Electronics: Designing with Flexibility for Reliability ...

EPE Acquires New Teradyne Javelin Flying Prober

Manchester, NH — EPE Corporation, a high-reliability EMS provider, has recently acquired a Teradyne Javelin 1004 flying probe test system. The company has offered locally-outsourced flying probe testing, but is now able to provide the service on-site. By bringing the system in-house, the company dramatically ...

EPLAN Presents New Smart Wiring Application

Monheim, Germany — Wiring a control cabinet has traditionally required a lot of time and expertise. EPLAN is making the process much easier with its new smart wiring application. The new software visually represents the wiring and provides the necessary production data 100 percent digitally. Knowledge ...

Essemtec Launches Fox Automatic Placement System

Glassboro, NJ — Essemtec, a manufacturer of production systems for electronic assembly and packaging, has launched its new Fox automatic pick-and-place system.. The machine has been designed to save production space without compromising productivity and placement quality.

FCT Develops Water-Soluble Flux for Soldering

Greeley, CO — FCT Assembly, a developer and manufacturer of high-performance solders and advanced fluxes, has formulated a halogen-free, water-soluble flux with high activity and neutral pH. Called 159HF, it is a versatile solder flux that has been designed to perform under high temperatures and ...

FRAMOS Offers HC-V Lens Series from Kowa

Ottawa, Ontario, Canada — Image processing systems in production equipment, quality inspection, logistics, and robotics are often subject to direct or indirect vibration and rapid movement. With the new vibration-resistant HC-V lens series from Kowa, systems engineers can achieve high image quality ...

Fuji Welcomes Koh Young to Fuji Smart Factory

Vernon Hills, IL — Fuji Machine Manufacturing has added Koh Young Technology to its family of Fuji Smart Factory members. Koh Young has supplied high-end 3D measurement and inspection solutions to the electronics assembly industry for over 14 years, backed up by more than 400 employees in its main facility ...

Henkel Releases Technomelt® for PCB Masking

Irvine, CA — Henkel Adhesive Technologies has added a new formulation to its series of Technomelt® high-performance, low-pressure molding materials. The newest material, Technomelt AS 8998, has been designed to provide a streamlined and economical alternative to conventional masking techniques ...
search login