Save. Share. Connect.
Monday, October 23, 2017
VOLUME - NUMBER
The ASSEMBLY Show, MD&M Minneapolis, productronica '17
NEPCON South China '17
ATX East / MD&M '17
SEMICON WEST '17
NEPCON China, SMT/Hybrid Pkg, EWPTE, EDS '17
ATX West and IPC APEX '17
ADM Cleveland and APEC '17
SMTAI and IMAPS '16
SEMICON West '16
NEPCON China '15
ATX WEST/APEX '15
SMTAI, Autotest, ATX MW/MDM and Assembly '14
AATE and IPC MW 11
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
IPC APEX '14
NEPCON China Product Preview '12
SEMICON WEST 10
Electronics West/MDM 11
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
SEMICON WEST 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Multi tradeshow Product Preview '12
ATE and IPC MW 09
Electronics West/MDM 12
NEPCON South China '16
Atlantic Design/ATX/MDM '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
SEMICON West '15
Nepcon South China '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
ATX/MDM EAST '15
SEMICON West '13
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
Atlantic Design/MDM 10
Atlantic Design/MDM 09
ATExpo & IPC MW 08
NEPCON South China '13
Electronic West/MDM 09
SMTAI and productronica '13
AATE/IPC Midwest 10
SMTAI and productronica '13
Atlantic Design/MDM 08
MVP to Show Latest Microelectronics, Semiconductor and SMT Inspection Equipment
Carlsbad, CA — Machine Vision Products, Inc., (MVP) is now offering its latest lineup of AOI systems for microelectronics, semiconductor and SMT assembly.
Acculogic Exhibits Range of Automated Test Systems
Markham, Ontario, Canada — Acculogic is demonstrating its FLS980 Series III flying prober, Scorpion BRiZ test and programming station and a comprehensive line of boundary scan test tools at productronica 2017.
Air-Vac Expands Lines of Precision SMT Rework Modules
Seymour, CT — Air-Vac has introduced its AVX1000, a high-performance SMT rework system designed for a wide range of PCB assemblies. This fully-automated platform provides precision motion control for all pick-and-place, site cleaning, and dispensing procedures. High-speed force feedback provides ...
Akrometrix: Ultra-Fast Tabletop Warpage Metrology
Atlanta, GA — Akrometrix, LLC, is now offering its tabletop shadow moiré (TTSM) system. The new machine offers all of the software features of Akrometrix's thermal warpage metrology systems in a compact, room temperature unit, and provides full field-of-view measurement in less than two seconds ...
AMICRA Unveils Precision Die and Flip Chip Bonder
Sunnyvale, CA — AMICRA has launched a new die and flip chip bonder. The NANO is designed for highly-demanding assembly tasks. Reportedly the highest-precision placement system in its class, the NANO supports a ±0.3 µm placement accuracy at full speed and three sigma.
Ash Intros Integrated HD Digital Microscope
Naas, Ireland — Ash Technologies has introduced its Omni, an integrated, fully-HD (1080p) digital microscope and measurement system that operates without a PC. Omni's custom platform incorporates a highly-configurable and upgradeable set of inspection and measurement applications, such as focus stacking ...
ASM Presents Flexible Smart Factory Solutions
Suwanee, GA — ASM Assembly Systems is presenting solutions for all areas of electronics production at productronica 2017. New products include improved SIPLACE TX high-speed placement modules and SIPLACE placement heads, a new JEDEC tray feeder, and innovations like the ASM Production Planner, off ...
Aven Intros Durable and Comfortable Cutters
Ann Arbor, MI — Aven has introduced its Stealth Cutters, a line of durable cutters manufactured from high-performance Japanese steel. Their induction-hardened cutting edges and a proprietary grinding process of the blades ensures crisp, clean cuts.
BPM Intros New Automated Programming System
Houston, TX — BPM Microsystems has introduced its new 4900 automated programming system (APS). The 4900, with its advanced chip-scale part (CSP) device handling, on-the-fly vision alignment, and HS400 programming speeds, satisfies a wide range of programming needs. With high-performance laser marking ...
BTU Debuts New PYRAMAX Reflow Oven
North Billerica, MA — BTU International has launched its latest PYRAMAX
vacuum reflow oven. The system has been designed around the requirements of large EMS and high-volume automotive customers. The unit is configured with 10 zones of closed-loop convection heating and a maximum production width ...
CBT Improves Print Speeds with DI Solder Mask
San Jose, CA — With its Phoenix and Raptor direct imaging (DI) systems and a new DI solder mask from Electra Polymer, CBT has achieved print speeds of less than 32 seconds on an 18 x 24 in. (45.7 x 61 cm) panel. CBT products are distributed in the U.S. by Technica USA.
Cicor's DenciTec Enables Further PCB Miniaturization
Cambridge, MA — Cicor's new technology platform, DenciTec
, enables a high density of integrated functions for PCBs. In microelectronics, the boundaries between thin film and printed circuit technologies are becoming increasingly blurred. Thin film technology works with materials, processes and ...
Cogiscan Intros Factory Intelligence — Analytics
Bromont, Quebec, Canada — Cogiscan has introduced its new Factory Intelligence - Analytics. This is the second major phase of evolution for the company's Factory Intelligence OEE (overall equipment effectiveness) software.
CyberOptics Launches MRS-Enabled Inspection Machines
Minneapolis, MN — CyberOptics
Corporation has introduced its SQ3000
-DD 3D AOI system with its new ultra-high-resolution multiple-reflection suppression (MRS) sensors. The company has also unveiled its SE3000
3D SPI and SQ3000
3D CMM, both powered by MRS technology.
Data I/O Secures Flash Devices Through Programming
Redmond, WA — Data I/O has introduced its new SentriX
security provisioning technology and ConneX
smart programming software. Driverless technology is quickly advancing with industry experts anticipating millions of fully autonomous cars on the road within ten years. As sophisticated hackers exploit ...
DEPRAG Intros Adaptive Fastening System
Lewisville, TX — DEPRAG has introduced its Adaptive DFS (DEPRAG fastening system). Engineered for flexibility, independent of material and fastener tolerances, or possible layer gap, this system is designed to create a strong joint in a short amount of time.
DIT-MCO Intros Handheld Wireless Cable Tester
Kansa City, MO — DIT-MCO has launched a new portable, handheld cable tester, HT-128. While it can be used as a benchtop cable tester for small assemblies, HT-128's main purpose is to test installed wiring harnesses, without having to use long extension cables or loop-back plugs to bring both ends ...
Electra Polymers: Solder Mask for Direct Image Exposure
Kent, UK — Electra Polymers, Ltd., is now offering a solder mask for direct image (DI) exposure systems, as well as ink-jettable solder mask. EMP110 DI is the company's latest solder mask for DI systems. The solder mask has been tested on multiple light engines with a variety of wavelength combinations. ...
Emil Otto Offers Lower-Volume Flux Concentrates
Eltville, Germany — All of the flux granulates from Emil Otto can now be transported in significantly lower volumes, and without hazardous substance identification. Emil Otto's new flux concentrates are particularly useful for customers who take deliveries of large quantities, or those who produce ...
EpoxySet Showcases Fast-Curing Structural Adhesive
Lincoln, RI — EpoxySet is showcasing its SetWORX
1510, a fast-gelling structural epoxy that has passed ISO 10993-5 and can be used for medical applications. This state-of-the-art epoxy has an easy-to-use 1:1 mix ratio and medium viscosity so it can be readily dispensed from cartridges or by meter mix dispensing ...
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM