Thursday, July 27, 2017
VOLUME - NUMBER
Advertisements


Home/Current Issue >  Product Previews > 

"V8 Power" and Nanometer Precision in PI Piezo Motor

Auburn, MA — PI (Physik Instrumente) has introduced a new, robust OEM walking motor drive, the N-331, with its configuration rooted in existing patented piezo actuator technology and a patented piezo stepping motion principle design.
Read More
 

Applied Energy Systems Upgrades Heater Blanket

Malvern, PA — Applied Energy Systems (AES) has introduced an updated design for its heater blanket for use with SEMI-GAS® and VERSA-GASliquified gas delivery systems. New features have been added to the standard blanket design to improve its safety and performance in vaporizing liquefied gases ...
Read More
 

Applied Motion Products Integrates HEIDENHAIN Encoder

Schaumburg, IL — HEIDENHAIN Corporation has partnered with Applied Motion Products in the development of Applied Motion's StepSERVO integrated motors. Using HEIDENHAIN's RENCO brand RCML 15 rotary encoders, StepSERVO combines the high-torque capabilities of step motors with the closed-loop dynamic ...
Read More
 

CyberOptics Showcases Multi-Sensor Portfolio

Minneapolis, MN — CyberOptics® Corporation is showcasing its WaferSense and ReticleSense auto multi-sensors (AMS/AMSR) at SEMICON West 2017. The company's AMS/AMSR portfolio measures leveling, vibration and relative humidity in an all-in-one, wireless, real-time device. Using the reticle- or wafer-shaped sensors with ...
Read More
 

KYZEN Releases Cu Pillar Flip Chip Cleaner

Nashville, TN — KYZEN® has introduced its MICRONOX® MX2707 cleaner, which is specifically designed for copper pillar flip chip cleaning applications. The cleaner is formulated to meet the demands of leadless devices, including BGAs, flip chips, QFNs, LGAs, and passives. It has been optimized ...
Read More
 

Marposs Develops Non-Contact Gauging Probe

Auburn Hills, MI — Marposs is displaying its new non-contact gauge (NCG), which is used for controlling the thickness of different transparent parts, such as glass, plastic or silicon wafers during production. The NCG probe can withstand harsh manufacturing environments, including direct contact ...
Read More
 

Mentor's Valor Enables Industry 4.0

Wilsonville, OR — Mentor's Valor IoT manufacturing hardware is designed to create a dedicated IoT infrastructure for the entire packaging assembly line, providing accelerated interfaces for machines that do not output Open Manufacturing Language (OML). This enables Industry 4.0 deployment without the need to ...
Read More
 

MicroAssembly Technologies Intros Die Attach System

Yokneam, Israel — For the first time in the U.S., MicroAssembly Technologies is offering its Crossover Model 6200 die attach system. The Crossover is a state-of-the-art die attach machine that is capable of performing any die attach process in fully automatic mode.
Read More
 

Nordson Showcases Test and Inspection Systems

Vista, CA — Nordson DAGE and Nordson YESTECH are showcasing a suite of award-winning systems targeted at both the semiconductor and PCB markets, including the Quadra 7 X-ray inspection system, M1m AOI system and 4800 advanced wafer testing bondtester.
Read More
 

PATLITE Offers LED Indicators and Signal Towers

Torrance, CA — PATLITE is offering a wide range of visual and audible indication products that range from MP3 voice alarms to signal lights with multicolor LEDs, along with network enabled signal towers.
Read More
 

Plasma Etch Exhibits Plasma Cleaning Solutions

Carson City, NV — Plasma Etch is providing live demonstrations of two of its most popular products, the PE-50 plasma cleaner and the plasma wand.
Read More
 

Royce and V-TEK Release Automated Die Sorter

Mankato, MN — Royce Instruments and V-TEK International have released an automated die sorter, the AP+. Royce and V-TEK combined technologies to build on the successful MP300, creating a solution for low-volume, high-mix production and research environments.
Read More
 

Sikama and Air Products Develop Reflow System

Santa Barbara, CA — Sikama International and Air Products and Chemicals, Inc., have partnered in the development of an electron attachment flux-less reflow system for the wafer-level packaging market.
Read More
 

ULVAC Intros Series of Industrial Vacuum Pumps

Methuen, MA — ULVAC Technologies has introduced its VS series of single-stage rotary vane pumps for a wide range of industrial vacuum applications. The VS650A and VS750A are robust, install-anywhere pumps with speeds of up to 750 m3/h (8,073 ft3/h). These small-footprint, all-in ...
Read More
 

Virtual Highlights Smart Handling Solutions

Colorado Springs, CO — Virtual Industries is exhibiting its lineup of manual vacuum handling solutions, including the TWEEZER-VAC® Elite and ADJUST-A-VAC® Elite.
Read More
 

YINCAE: Ball Attach Adhesive for Lead-Free Bumping

Albany, NY — YINCAE is showcasing two new materials, its BP 256 ball attach adhesive and the SMT 256EP replacement for conventional solder paste. BP 256 has been designed to enhance solder joint reliability and eliminate cleaning for lead-free ball bumping processes on CSP, BGA, flip chip, and PoP ...
Read More
 

YXLON Installs 600th X-ray Inspection System

Hudson, OH — YXLON has installed its 600th MU2000-D X-ray inspection system. After launching in 1997, the universal radiographic system is still a very successful inspection system worldwide, due to its flexibility and durability.
Read More
 

ZEISS: FIB-SEM for 3D Analytics and Sample Prep

Thornwood, NY — ZEISS has introduced a new generation of focused ion beam scanning electron microscopes (FIB-SEMs) for high-end applications in research and industry. The ZEISS Crossbeam 550 offers a significant increase in resolution for imaging and material characterization, as well as a speed ...
Read More
 

ZYGO Expands Molded Base Films Analysis

Middlefield, CT — ZYGO has expanded the capabilities of its Nexview 3D optical profiler for measuring the thickness and topography of films. Using ZYGO's patented Model Based Films Analysis (MBA), full area profiling of top surface, thickness, and underlying surfaces in the presence of a transparent ...
Read More
 

Beckhoff Intros Explosion-Proof Terminals

Savage, MN — Beckhoff has introduced its ELX series EtherCat terminals built with safe inputs and outputs for direct field connection of devices in hazardous areas, including classified zones 0, 1 and 2. PC-based control from Beckhoff now combines industrial automation and process technology, including ...
Read More
 
 
 
search login