Saturday, February 25, 2017
Home/Current Issue >  New Products > 
2E SysCom Develops IGBT Connector and Cable Assemblies
Publication Date: 2/6/2017

Millis, MA — 2E SysCom has developed IGBT (insulated gate bipolar transistor) connectors and cable assemblies designed specifically for attaching to spade terminals on IGBT power modules. The connectors and cable assemblies are used to connect IGBT modules to PCBs. Suitable for 2.8 x 0.5 mm (0.11 ...
BEI Kimco Creates Anti-Rotational VCA
Publication Date: 2/6/2017

Vista, CA — BEI Kimco has introduced a new moving magnet voice coil actuator with a flexure designed to ensure high alignment accuracy by preventing unwanted shaft rotation. The new VCA has a long lifespan at cost-effective pricing and is suited for applications where extreme precision is required ...
Binder Intros Compact Hex Nut Power Connector
Publication Date: 2/6/2017

Camarillo, CA — Binder USA has introduced a new style of panel-mounted connector to its line of power solutions. The RD24 connector with plastic hex nut is a solution for applications with thick panel boxes and reduces the need for mounting screw holes. The power connectors are compact and easy to ...
Bridgetek Intros Super-Bridge Microcontroller Units
Publication Date: 2/6/2017

Tigard, OR — Bridgetek has introduced a new series of super-bridge microcontroller units (MCUs) to complement its existing FT90x products. The new FT93x devices offer identical performance levels and the same principal features and functionality, but in smaller, lower pin count packages — amounting ...
CUI Improves Thermal Management with DC Fans
Publication Date: 2/6/2017

Tualatin, OR — CUI has added its CFM series of high-performance DC fans to its existing portfolio of thermal management products. The fans are available in various frame sizes from 40 to 120 mm (1.6 to 4.7 in.) and deliver airflow ranging from 10 to over 200 CFM.
Dow Corning Develops Printable Silicone Rubber
Publication Date: 2/6/2017

Auburn, MI — Dow Corning has developed a 3D-printable silicone rubber, LC-3335, in collaboration with German RepRap GmbH, a manufacturer of fused filament fabrication (FFF) 3D printers. The new material is the first Dow Corning product formulated specifically for designers seeking to combine the performance ...
Excelsys: Medical Safety Approved Fanless Power Supply
Publication Date: 2/6/2017

Cork, Ireland — Excelsys has designed its CoolX600 series of convection-cooled modular power supplies to deliver 600W of output power without fan assisted cooling. According to the company, it is the only fanless modular power supply on the market that meets medical safety approvals. Based on the ...
Hemco Expands Line of UniMax Hoods
Publication Date: 2/6/2017

Independence, MO — Hemco Corporation has expanded its line of UniMax fume hoods containing fire suppression systems to meet California requirements. Standard models range from 6 to 24 ft (1.8 to 7.3m) wide, 4 to 8 ft (1.2 to 2.4m) deep, and 7 to 16 ft (2.1 to 4.9m) high. Tall apparatus and distillation ...
Ironwood Intros 378-Pin BGA Socket
Publication Date: 2/6/2017

Eagan, MN — Ironwood Electronics has introduced a new high-performance BGA socket for 0.61 x 0.64 mm (0.024 x 0.025 in.) pitch, 378-pin BGA ICs. The SG-BGA-7303 socket is designed for 18.2 x 9.7 mm (0.7 x 0.4 in.) BGA packages and operates at bandwidths up to 36 GHz with less than 1 dB of insertion ...
Kaman Creates Non-Contact Position Sensing System
Publication Date: 2/6/2017

Colorado Springs, CO — The measuring division of Kaman Precision Products has introduced its OEM-2306, a non-contact, linear displacement measuring instrument that uses eddy current technology. The OEM-2306 offers the same high performance machine control as the KD-2306 signal conditioning electronics ...
KOA Speer Expands Range of Chip Resistors
Publication Date: 2/6/2017

Bradford, PA — KOA Speer Electronics has introduced an expanded resistance range of 47Ω to 1 MΩ for its RN73H series of ultra-precise thin-film metal chip resistors. The new low end of the resistance range (47Ω) affects the 0402, 0603, 0805, and 1206 sizes.
Komax Mixer Addresses Desalination Problems
Publication Date: 2/6/2017

Huntington Beach, CA — Komax Systems now offers its triple action static mixer for use in desalination plants and other water treatment applications. The mixer is designed specifically to aid in the chemical addition phase of the desalination process. Custom configurations are available and the mixers ...
Marktech: High-Rel Packaging with Cree Chips
Publication Date: 2/6/2017

Latham, NY — Marktech Optoelectronics has introduced its latest series of high-reliability metal can packages, which incorporate Cree's robust LED dice. Cree combines highly-efficient InGaN materials with proprietary substrates to deliver superior performance for high-intensity LEDs. Marktech's metal ...
Meggitt Sensing Intros Miniature Pressure Sensor
Publication Date: 2/6/2017

Irvine, CA — Meggitt Sensing Systems has launched its Endevco 8523 high-temperature pressure sensor that uses silicon strain gauges to enable gauge and differential measurements. Designed for static or dynamic pressures, applications include inlet distortion pressures in turbine engines, transmission ...
Mill-Max Releases Through-Hole Spring-Loaded Connectors
Publication Date: 2/6/2017

Oyster Bay, NY — Mill-Max has added a through-hole version of its 2 mm (0.08 in.) pitch spring-loaded connectors to complement the series' surface mount version. These spring-loaded connectors (SLCs) are an appealing option that combine both durability and space-saving qualities. For board-to-board ...
Murata Intros High Power Density DC-DC Converter
Publication Date: 2/6/2017

Smyrna, GA — Murata has introduced its MYMGK series of miniature "mono block" type, surface mount, point-of-load (PoL) DC-DC converters. The non-isolated mono block converters are available in two models, 6 and 20A. Both versions are available with two output voltage range options. Typical applications ...
NK Technologies Intros Voltage Transducer
Publication Date: 2/6/2017

San Jose, CA — NK Technologies has introduced its VTU voltage transducer, which measures AC or DC circuit voltages up to 1,200V with a single sensor. The sensor produces an analog signal directly proportional to the rms voltage, making it a useful tool for detecting power generation issues such brown ...
OSG Creates Comprehensive Catalog of Cutting Products
Publication Date: 2/6/2017

Glendale Heights, IL — OSG USA has introduced its 2017/18 cutting tool solutions catalog in both print and digital versions. The latest catalog edition is over 1,300 pages and includes new products such as Exocarb® ADF flat drills and Phoenix® PSTW indexable shoulder cutters. It also includes ...
Pacific Power Source: Programmable AC/DC Power Supplies
Publication Date: 2/6/2017

Irvine, CA — Pacific Power Source has launched its new AFX series of programmable AC and DC power supplies. AFX models are available in power levels ranging from 9 to 60 kV. All models are based on a proprietary, all-digital, power conversion technology platform that supports a set of formerly unavailable ...
Pittman Launches Brush DC Motor
Publication Date: 2/6/2017

Harleysville, PA — Pittman® a business unit of AMETEK Precision Motion Control, has introduced the latest in its line of brush-commutated DC motors, the DC022C series, a 22 mm (0.9 in.) diameter unit offered in three lengths with continuous output torques of 0.0056 to 0.141 Nm.
search login

Click here to cancel

You were trying to view a protected page.
Please login to gain access or cancel to go back to the site.
User ID:  
Remember User Name
Stay signed in.

Forgot your password?