Wednesday, September 28, 2016
VOLUME -24 NUMBER 8
Publication Date: 08/1/2009
Advertisements
Archive >  August 2009 Issue >  Management > 

It's Not "Just a Circuit Breaker"

Most design engineers think of a circuit breaker as a low cost commodity component that usually doesn't get much attention when designing a new piece of equipment or system. In fact, on many occasions I have heard someone say, "It doesn't matter; I just need a circuit breaker." The fact of the matter is a circuit breaker is an extremely important component in every system. Circuit breakers are used to protect valuable equipment or devices from damage or more importantly they are used to prevent a life threatening system disaster such as fire. It is important to take the time to make sure the circuit breaker you are selecting is not only the right type for your application, but it is also of high quality.

Today, there are many circuit breaker choices to fit virtually any industrial DIN rail application. However, even with so many choices available, selecting the proper circuit breaker can be an easy task. If you just do your homework and collect all of your circuit specifications by answering these questions:

  • What is to be protected, wires or devices?
  • What is the voltage type, AC or DC?
  • What is the circuit or device current rating?
  • How many poles are required, 1, 2 or 3 pole?
  • What is the inrush current level, trip curve — short, medium or long?

DIN rail circuit breakers are available in different package configurations ranging from a high density space saving size of 13mm per pole to 26mm per pole for a high current type. Over the last few years, the price of a high quality circuit breaker has dropped below $10.00 per pole. This transition has allowed many more DIN rail mount circuit breakers to be used in place of fuses and fuse holders. In addition to providing a cost savings, the circuit breaker is much more convenient to use. When a fuse blows, it must be replaced by a new one; when a circuit breaker trips, it simply has to be reset.

There are different categories of protectors — supplementary, branch, DC, high current or ground fault. Selecting the proper one depends on the application.

Supplementary Protection
The supplementary circuit breakers, often referred to as UL1077 circuit breakers, are protectors that are typically used to provide protection to a device. Usually a branch UL489 circuit breaker is already installed up stream of the supplementary circuit breakers to protect the circuit wiring. Most supplementary circuit breakers are available in one, two and three poles with the option of a short (B), medium (C) and long (D) trip curves. They typically can handle a minimum amp rating of 1A and a maximum amp rating of 63 A. For convenience and ease of use the circuit breakers you select should have a reliable wire connection and have an on/off indicator to minimize troubleshooting time.

Branch Protection
The branch circuit breakers, often referred to as UL489 circuit breakers are used in most applications for protecting the circuit wiring and preventing a fire. Due to the strict testing requirements by UL, the DIN rail mount branch circuit breakers are not available in as many configurations or sizes. However, they are typically available in one and two pole versions with current ratings of 1 to 25 amps. Branch circuit UL489 circuit breakers are UL listed so these breakers can be used in applications where a listed breaker is required.

DC Protection
The DC circuit breakers are used in applications to provide protection where direct current or DC voltage is used. DC circuit breakers are available in both UL1077 and UL489 versions. Generally the DC circuit breakers are available in one or two poles with the short (B) or medium (C) trip curves. They are available with current ratings ranging from 1 to 63 Amps.

High Current Protection
High current circuit breakers are used in applications to protect devices with current requirements higher than 63 amps. Whereas most DIN rail mounted circuit breakers have a maximum rating of 63 amps, the high current circuit breakers are unique to only a few manufacturers and have a current rating up to 125 amps. These circuit breakers are UL1077 approved for use as supplemental protectors and are available in 1, 2 and 3-pole versions with the option of medium (C) or long (D) trip curves. In some applications the high current circuit breakers are a cost-effective solution to replacing expensive molded case circuit breakers (MCCB).

Ground Fault Protection
The ground fault circuit breaker is used to provide protection to equipment that is located in wet or damp environments. The way this device works is when a ground fault or earth leakage greater than 30mA is detected the unit trips and opens the circuit breaker. On most ground fault circuit breakers a visual trip indicator and push to test button are standard features

Circuit Breaker Accessories
Circuit breakers often include such useful features as easy-to-wire screw-clamp connections and DIN rail mounting to save valuable time. A shunt release is an accessory that is easily installed on the left hand side of the circuit breaker. It provides remote control tripping and indicates circuit breaker status. An alarm contact and auxiliary contact can be used to indicate if a circuit breaker is open or closed.

A helpful accessory is a lockout/tagout. This accessory is a locking lever that can be added to the circuit breaker after installation for those applications that require lockout/tagout. It allows the circuit breaker to be locked in either the open or the closed position. When in place, the lockout accessory does not impede the ability of the circuit breaker to trip. In addition, the lockout/tagout accessory is designed so that up to 3 padlocks can be added to the breaker.

Selecting the correct circuit breaker for your application can be easy, provided you are diligent in making sure that all your circuit specifications are met. It is an important component in your system that cannot be overlooked; it provides protection to expensive devices and to prevent system disasters. Now that you are forearmed, you will never gain be able to say, "It doesn't matter; I just need a circuit breaker."

Contact: Automation Systems Interconnect, P.O. Box 1340, Mechanicsburg, PA 17055 877-650-5160 or 717-249-5581 fax: 717-249-5542 E-mail: LDye@asi-ez.com Web:
http://www.asi-ez.com

Add your comment:

Full Name:
E-mail:
Subject:
Comment:
 

 
 
search login