Save. Share. Connect.
Sunday, June 25, 2017
VOLUME -24 NUMBER 10
Publication Date: 10/1/2009
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: SMT and Production
Product Preview: productronica
October 2009 Issue
Electronic Mfg. Products
Add Message Board
IPC Intros 10ml Re-Sealable Lubricant Tubes
Three varieties of assembly lubricant.
Burlington, NJ — Re-sealable plastic tubes of P-80
Temporary Rubber Assembly Lubricants are now available from International Products Corporation (IPC) in the new 10ml size sold in cases of 100. The new tubes have heat-sealed tips which will prevent leaks during shipping and keep material fresh until it is used.
In addition to being useful for field service, the re-sealable plastic tubes offer seal distributors and other rubber component manufacturers a convenient way to be certain their clients use the proper lubrication for installing their parts or seals.
P-80 lubricants provide temporary lubrication that eases assembly of tight-fitting parts such as o-rings, hoses, seals, grommets, bushings, grips and many other parts. By reducing the force needed for assembly, lubricant products help speed production while lowering the incidence of damaged parts and injury to workers. The lubricants are widely used in the automotive, appliance, and pump industries and are compatible with most elastomers, plastics, and metals.
The 10ml plastic tubes are available in several P-80 formulas: Emulsion Temporary Rubber Assembly Lubricant is a biodegradable formula with a milky consistency making it suitable for easing the assembly of o-rings, hoses, grommets and bushings. P-80 THIX Rubber Lubricant Gel is a thicker version that is also biodegradable, stays where it is applied without dripping, and is especially useful for vertical or overhead applications. P-80 Grip-It Quick-Drying Temporary Lubricant dries quickly to allow the natural tight fit of rubber to return. P-80 Emulsion IFC and P-80 THIX IFC have similar lubricating properties as industrial P-80 Emulsion and P-80 THIX but are NSF registered as H1 lubricants and they meet FDA regulation 21 CFR 178.3570 allowing use in incidental food contact applications.
Contact: International Products Corp., 201 Connecticut Drive, Burlington, NJ 08016
609-386-8770 fax: 609-386-8438 E-mail: email@example.com Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM