Save. Share. Connect.
Thursday, September 29, 2016
VOLUME - NUMBER
NEPCON South China '16
SEMICON West '16
Atlantic Design/ATX/MDM '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
Nepcon South China '15
SEMICON West '15
ATX/MDM EAST '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
NEPCON China '15
ATX WEST/APEX '15
AATE and IPC MW 11
SMTAI, Autotest, ATX MW/MDM and Assembly '14
SEMICON West '13
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
IPC APEX '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
NEPCON China Product Preview '12
Atlantic Design/MDM 10
Electronics West/MDM 11
SEMICON WEST 10
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
Atlantic Design/MDM 09
SEMICON WEST 08
NEPCON South China '13
ATExpo & IPC MW 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Electronic West/MDM 09
SMTAI and productronica '13
Multi tradeshow Product Preview '12
AATE/IPC Midwest 10
Electronics West/MDM 12
ATE and IPC MW 09
SMTAI and productronica '13
Atlantic Design/MDM 08
Add Message Board
NKK Intros Mercury-Free Mini Tilt Switches
Mercury-free tilt-sensing switch.
Scottsdale, AZ — NKK Switches has launched the DSB Series of mercury-free tilt sensor switches. These environmentally friendly switches are engineered to replace mercury and pendulum switches and are well suited to meet product safety concerns due to normally closed (on) status.
A through hole, PCB mounted device, the DSB Series uses a photo interrupter instead of conventional contacts to ensure high reliability and sensitivity to very small angle changes, while supporting today's environmental and green standards.
Inside, DSB Series switches contain two solid-state devices: one an infrared light emitting diode and the other a photo transmitter. A bright nickel-plated ball rests at the focus point when the switch is level. The internal ball movement allows functionality of 360° circumference rotation. The switch is triggered when tilted beyond ±30° from the horizontal.
The tilt sensor switch uses a sealed construction for protection from environmental elements, including hydrogen sulfide, sulfur dioxide and nitrogen hydroxide. It has a completely sealed body to allow process compatibility for automated soldering and cleaning. Terminals are made of ammonia-resistant material and are crimped to ensure secure PCB mounting and to prevent dislodging during wave soldering.
These switches are available with right angle or straight PC terminals. The primary difference between the two configuration options is the placement of the terminals, as the ball always operates with gravity in the horizontal position. These two configurations allow design engineers flexibility in mounting arrangements. In addition, the compact dimensions of these devices make them suitable for high density mounting if required.
Contact: NKK Switches, 7850 E. Gelding Dr., Scottsdale, AZ 85260
480-991-0942 fax: 480-998-1435 Web:
See at EDS Booth #2950P.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM