Save. Share. Connect.
Tuesday, March 20, 2018
VOLUME -25 NUMBER 10
Publication Date: 10/1/2010
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: Components and Distribution
Product Preview: electronica
October 2010 Issue
Add Message Board
Regal Intros Edge-Mounted BNCs
BNCs with firm PCB mounting.
Sunnyvale, CA — Regal Electronics has introduced a "Space-Saver" BNC connector that mounts on the edge of a printed circuit board. In addition to a low profile advantage in applications with tight vertical constraints, the new connector also reduces the twisting stress on solder joints inherent in BNC connector mating. A "notch" in the new connector slips over the edge of a PC board prior to soldering, forming a tight mechanical fit that transfers the majority of the rotational energy to the PC board instead of more vulnerable solder joints.
Another advantage of the BNC's edge-mounted design is that the center pin and connector body are soldered directly to a PC board, minimizing the "antenna effect" caused by typical elevated mounting approaches and associated EMI/RFI problems at higher frequencies. The new BNC connector has a 75Ω impedance and is tested to 2Ghz.
Contact: Regal Electronics, Inc., 120 San Lucar Court, Sunnyvale, CA 94086
408-988-2288 fax: 408-988-2797 Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM