Save. Share. Connect.
Saturday, July 23, 2016
VOLUME - NUMBER
Switches & Relays
HOME / CURRENT ISSUE
Add Message Board
4DSP Adds Two A/D D/A Cards
A/D daughter card.
Reno, NV — 4DSP has released two new analog-to-digital/digital-to-analog cards based on the FPGA mezzanine card standard (FMC). The FMC204 and FMC150 daughter cards are mechanically and electrically compliant with FMC standard (ANSI/VITA 57.1).
The FMC204 is a quad-channel D/A FMC daughter card, providing four channels of 16-bit D/A at 1Gsps. The card allows flexible control on clock source, sampling frequency, and calibration through an I2C communication bus, and includes a high-pin count (HPC) connector and front panel I/O. The card supports LVDS/2.5V IO signaling and includes an HDMI connector for user defined signaling.
The FMC150 is a dual channel A/D and dual channel D/A FMC daughter card. The card provides two channels of 14-bit A/D at 250Msps and two channels of 16-bit D/A at 800Msps. The FMC150 allows flexible control on clock source, analog input gain, and offset correction through serial communications buses and includes a low-pin count connector and front panel I/O. The card supports LVDS/2.5V IO signaling. The design is based on TI's ADS62P49 dual-channel 14-bit 250Msps ADC and TI's DAC3283 dual channel 16-bit 800Msps DAC.
Both cards can be clocked by an internal clock source, optionally locked to an external reference, or by an external sample clock supplied through a coax connection. In addition, there is one trigger input for customized sampling control. Both the FMC204 and FMC150 cards can be used in a conduction-cooled or convection-cooled environment and are equipped with power supply and temperature monitoring and offer several power-down modes to switch off unused functions, reducing system level power and heat, making them well suited for software-defined radio (SDR), battery or other low power source applications. This is suitable for applications such as airborne where power demand effects mission range and on-station mission time.
Contact: 4DSP, LLC, 955 South Virginia St., Suite 214, Reno, NV 89502
775-233-5784 fax: 775-473-9928 E-mail: firstname.lastname@example.org Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM