|Mornsun: Short-Ckt Protected DC/DC Converters|
|Hudson, MA — Mornsun has introduced the A_S-1WR & B_LS-1WR Series of SIP DC/DC low-cost converters that provide continuous short circuit protection. Until now, most design engineers have had to accept low-cost unregulated DC/DC converters that can fail quickly with a short circuit condition. \par ...|
|Murata Intros 2100 Watt DC/DC Supply|
|Mansfield, MA — Murata Power Solutions has introduced its D1U4CS front-end 2,100 Watt DC/DC power supply. This highly efficient unit, typically 93 percent efficient at half load power, is designed to deliver bulk power to 54VDC distributed power applications. |
|NKK: Mini Lighted Snap-In Rockers|
|Scottsdale, AZ — New from NKK Switches, the CWS Series of full-face illuminated miniature rocker switches are suitable for compact or crowded designs requiring illuminated switches at a low cost.|
|Onset: Data Logger for Energy Management|
|Bourne, MA — Onset Computer Corporation has introduced the HOBO UX120 Pulse Logger, a highly versatile, 4-channel energy data logger that combines the functionality of four separate data loggers into a single compact unit.|
|Power Supplies Keep Cool with Orion Fans|
|Dallas, TX — Orion Fans, division of Knight Electronics, is keeping power supplies cool, as indicated by increased sales of its DC fans to OEMs and power supply manufacturers. The fans are used in cooling power supplies because of key features that improve overall performance as well as a wide variety ...|
|Pittman: Brush-Commutated DC Servo Motors|
|Kent, OH — Pittman® 8540 Series brush-commutated DC motors compare favorably with similarly sized conventional counterparts; they provide improved power density from bonded neodymium magnets and offer higher-performance power solutions in a compact and lightweight design. Typical applications for ...|
|Premo: EMC Filters for Elevator Motors|
|Barcelona, Spain — A new family of EMC filters from Premo is specifically designed to deal with EMI generated by elevator motors. Filters are available from 7 to 250A and can operate in applications with nominal voltages of 520VAC 50/60Hz, and a 720VAC version is also available. Connections are made ...|
|Protek Intros Medical Power Supplies|
|Hudson, MA — The new PM400 Series of AC/DC power supplies from Protek Power offers 400 watts of performance-packed design and compliancy to UL60601-1 and TUV 60601-1 medical safety standards. Units are also RoHS compliant. This low profile 400W Series is suitable for a variety of medical and dental ...|
|100-400 Watt Load Share Eval Board from PSUI|
|Wrentham, MA — Power Sources Unlimited, Inc. has released its Integrated Power Designs NXT Series Load Share Evaluation Board.
The load sharing feature of the NXT-100, 175, 225, 325 and 400 watt single-output ITE and medical switching power supplies allows for accurate current sharing between two or more power supplies ...
|Pulse Intros First CO Splitter Module|
|San Diego, CA — New from Pulse Electronics Corporation is the first dual central office VDSL2 splitter module. The B8891DVNL combines two central office (CO) splitter modules onto one platform. This compact configuration increases available PCB space by 40 percent while reducing the component count ...|
|New Hipot Tester from Quadtech|
|Marlborough, MA — QuadTech has released the new Guardian 500VA Plus, which replaces the original Guardian 500VA in the hipot tester product family. The new Hipot Analyzer is designed for applications requiring a 500VA output transformer capacity with 100mA AC output current and 200mA short circuit current. ...|
|RFMD Adds 2 New VC Attenuators|
Greensboro, NC — RF Micro Devices, Inc. (RFMD) has released of two new voltage controlled attenuators (VCAs), the RFSA2013 and RFSA2023. The new VCA components, which operate from 5V and 3V supplies, respectively, cover a wideband frequency range of 50 to 4000MHz and satisfy a wide range of applications across end markets. |
These fully monolithic VCAs are said to provide excellent linearity with a third order intercept point greater than 50dBm over a 30dB gain control range. The devices incorporate a new circuit architecture that provides exceptional overall performance in linearity, attenuation range, DC current and bandwidth, as well as a linear attenuation ...
|New Wideband WiMax Filter from Sangshin|
|San Jose, CA — Sangshin Elecom has introduced a fully customizable, wide band, ceramic filter for 5GHz applications. Covering 5.2 to 5.8GHz, the MBP33RC5500S600A exhibits 1.0dB of insertion loss across the band and is housed in a small, 8 x 5mm package. Applications include WiMax and multiple WiFi ...|
|Schurter: Broad Range of Standard EMC Filters|
Santa Rosa, CA — Schurter has added several new filters to its already extensive EMC product line. The expansive filter line comes in a wide variety of sizes, shapes, mounting and connection options, as well as varying performance characteristics for meeting all types of application requirements. The selection of discrete line filters is offered with features that include 1 and 2 Stages for single and 3-phase systems, along with a wide range of current ratings and operating voltages in both AC and DC. |
Terminal options include PCB, quick connect, bolt and nut, screw clamps or wires. Various mounting styles include chassis mount, DIN rail, PCB and screw mount. ECO filters with partial potting are also offered for a lightweight economical and environmentally friendly ...
|SIE Intros Line Replaceable Unit Chassis|
|Brockton, MA — SIE Computing Solutions, Inc. has unveiled its new series of VITA 58 Line Replaceable Units (LRU). This new product line launches the company's 734 Series chassis, which meets the level 2 and 2-plus maintenance requirements specified in the VITA 58 standard.
Ranging in size from V58/1H1 to V58/8H2, many of the VITA 58 enclosures are backward-compatible with the ARINC600 specification, and all utilize a rear-mount blind mating connector system that allows for plug-and-play deployment on the battlefield, in the flight line, ...
|Signal Intros Heavy Duty Transformers|
|Inwood, NY — Signal Transformer, a subsidiary of Bel Fuse Inc. has added the MTT (Machine Tool Transformer) "Machine Builder" Series of chassis-mount power isolation transformers to its expanding portfolio of standard and custom power transformers and high frequency magnetics.|
|SinkPAD: New Thermal Management for LEDs |
|Placentia, CA — SinkPAD Corporation has unveiled its new Thermal Management technology, providing the most efficient conduction cooling technology for LED applications.|
|Stahlin's Large and Freestanding Enclosures |
|Belding, MI — Stahlin offers a line of enclosures for dimensionally large applications — 48 x 36 to 90 x 72 (1.2 x 0.9m to 2.3 x 1.8m). The company's Control Tower Series has been designed for use in larger industrial control systems and machine tool control panels. The industrial look and ruggedness ...|
|Volpi: Intense LED Light Source for Machine Vision|
|Auburn, NY — Volpi is introducing the intraLED 3 LED light source, an economical and compact lighting system that has a service life of 50,000 hours and a light intensity of over 500 lumens (measured on a 1-meter light guide with an active diameter of 13.5mm).|
|XP Power Intros 150W AC-DC Supplies|
Sunnyvale, CA — XP Power has unveiled the VFT series of low-cost 150W single-output AC-DC power supplies aimed at high-volume cost-sensitive applications. Packaged within the industry standard 3 x 5-in. format and measuring just 1.4-in. high (76.2 x 127.0 x 33.2mm), the VFT150 series can provide a full 150W output when force-cooled with only 15 CFM airflow. Alternatively using convection cooling alone, the units can provide up to 100W output. |
The VFT150 operates from a universal input of 90-264VAC and has active power factor correction. Providing the nominal outputs ...