Save. Share. Connect.
Sunday, October 23, 2016
VOLUME -26 NUMBER 10
Publication Date: 10/1/2011
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: PCB and Production
Product Preview: productronica
October 2011 Issue
Add Message Board
WAGO: Power Supply Module
Power supply module.
Germantown, WI — Carrying IECEx-i certifications, WAGO Corporation's 750-606 24VDC Supply Module provides 1A (max) for WAGO-I/O-SYSTEM Ex-i modules. The power supply module permits one WAGO-I/O-SYSTEM node to serve hazardous and non-hazardous environments by separating intrinsically and non-intrinsically safe sections. This provides hazardous applications, e.g., mining and petrochemical process machinery, with fieldbus-independence and a cost-effective connection to sensors/actuators in Zones 0 and 1.
The unit monitors the power supply to downstream WAGO EX-i I/O; on-board diagnostics and auto-reset fuse minimize in-the-field service. Approximately 10 seconds after a fault is cleared, the electronic fuse automatically re-activates output voltage.
This eliminates in-the-field resets — important when explosive gas- or dust-air mixtures hinder service. On-unit LEDs simplify troubleshooting by indicating an open circuit and if the upper/lower limits have been exceeded. The 750-606 parameterization occurs via WAGO-I/O-CHECK software.
Contact: WAGO Corp., P.O. Box 1015, Germantown, WI 53022
800-346-7245 or 262-255-6333 fax: 262-255-3232 E-mail: email@example.com Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM