Save. Share. Connect.
Thursday, September 29, 2016
VOLUME -27 NUMBER 4
Publication Date: 04/1/2012
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: Assembly and Packaging
NEPCON China Product Preview
April 2012 Issue
Add Message Board
CW Intros High Density Rectangular MIL Connector
High-density MIL connector.
Southampton, PA — CW Industries has introduced a new high density rectangular connector with enhanced retention and solder-ability features that meets the requirements of MIL-DTL-28804 and NAVSEA 3164341 and 3164342 specifications.
Rated at 5 amps per contact, the connector has a temperature rise of less than 30°C after three hours of each contact continuously conducting 5 amps. The new padded design is an improvement over the standard version as it provides a means for improved solder flow and for post solder visual inspection.
The custom designed inserts offer enhanced retention to meet high altitude heat and shock vibration requirements. These connectors meet a minimum 80 oz. torque requirement and an 80-lb. axial pull-out force. Pin counts of 38, 50, 88, 108 and 132 are available with a standard pin length of 0.250 (6.35mm) ±0.025-in. (±0.635mm). Other lengths and pin counts are available upon request. The CCM-20, 21, 22 and 23 series connectors are made of glass-filled polyester with beryllium copper alloy contacts that are gold-plated in the mating area. The termination end is solder dipped over nickel plating.
Typical applications include advanced missile systems, torpedoes, flight guidance systems and other sophisticated military electronics equipment.
Contact: CW Industries, 130 James Way, Southampton, PA 18966
215-355-7080 E-mail: firstname.lastname@example.org Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM